Highly Dynamic Depaneling System for Maximum Part Throughput
The DIVISIO 6000 combines depaneling with final assembly processes on a very small footprint. Due to the parallel working of the two carbon axes, a cycle time of less than 2.5 seconds per individual circuit is achieved. Adapted to the customer-specific processes, either a shuttle system or a rotary table is used. Customer-specific assembly, testing and machining processes are integrated.
One System for Several Processes
Final assembly processes can be integrated in the system, which normally require several individual machines. Thanks to this combination...
- space requirement is significantly reduced
- costs for the networking of several individual machines are eliminated
- the installation time is significantly reduced
Everything from One Source
- One contact for various final assembly processes
- Reduced training costs: Employees only need training for one user interface from one manufacturer
- Reduction of error sources thanks to the use of only one software
Two Systems for Every Need
A rotary table as well as a shuttle system can be optionally integrated into the DIVISIO 6000. Both systems work with two carbon axes, which load and unload the rotary table or the shuttle simultaneously. For the transfer to the material logistics, different outfeed variants are possible, such as full surface belt, segmented belt or a product carrier circulation system.
The rotary table can be used to integrate several final assembly processes. The second possibility to realize the workflow is a shuttle system. Up to four shuttles can be used for a higher parts throughput. This allows the following process steps to be implemented: